Glitter HTV

Glitter HTV - Light Green 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV -White 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV White - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Sold Out
Glitter HTV -Silver 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Silver - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Sold Out
Glitter HTV -True Blue 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV True Blue - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Saphire Blue 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Saphire Blue - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Aqua 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Aqua - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Old Blue 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Old Blue - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Burgundy 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Burgundy - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Silver Confetti 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Silver Confetti - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Sold Out
Glitter HTV - Gold Confetti 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Gold Confetti - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Hot Pink 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Hot Pink - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Jade 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Jadei - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Lemon Sugar 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Lemon Sugar - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Mermaid Blue 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Mermaid Blue - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Eggplant 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Eggplant - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Black Gold 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Black Gold - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Black Silver 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Black Silver - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Sold Out
Glitter HTV - Bronze 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Bronze - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Cherry 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Cherry - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Lavender 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Lavender - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Neon Blue 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Neon Blue - 20" x 12"
$8.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Neon Yellow 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Neon Yellow - 20" x 12"
$8.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Neon Green 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Neon Green - 20" x 12"
$8.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Neon Orange 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Neon Orange - 20" x 12"
$8.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Neon Pink 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Neon Pink - 20" x 12"
$8.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Neon Purple 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Neon Purple - 20" x 12"
$8.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Mint 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Mint - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Black 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Black - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Sold Out
Glitter HTV - Blue 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Blue - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Red 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Red - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Sold Out
Glitter HTV - Blush 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Blush - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Confetti 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Confetti - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Copper 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Copper - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Sold Out
Glitter HTV - Dark Green 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Dark Green - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Emerald 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Emerald - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Gold 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Gold - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Old Gold 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Old Gold - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Purple 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Purple - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
Glitter HTV - Rainbow White 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Rainbow White - 20" x 12"
$8.50
Add to Cart
  • 1 lb
  • Sold Out
Glitter HTV - Red 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Red - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Sold Out
Glitter HTV - Rose Gold 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Rose Gold - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Sold Out
Glitter HTV - Royal Blue 20" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut:

Blade: Standard
Setting: Iron On+

 

 

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

 

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm

 

CARE

 

 

Glitter Applies to:

100% cotton
Poly/cotton blends
100% polyester
Leather

 

Laundering:

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Glitter HTV Royal Blue - 20" x 12"
$8.00
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1